Pro Maxima Raptor Series CM-335 Multi Functional Trainer
This product ships directly from the manufacturer. Estimated delivery is 4-6 weeks.
Features:
- Receive a total body workout with this piece of equipment.
- 2″ x 2″ & 2″ x 4″ Heavy wall steel frame.
- Dual adjustable pulley system with 2 enclosed weight stacks.
- 11 different pulley adjustments on each column.
- Multiple persons can work out at the same time.
- Includes a multi-grip chin-up station.
- Total body workout.
- Over 40 exercises.
- Bright red colored pull knobs.
- Instructional color placard.
- 1/4″ nylon coated aircraft cable driven.
- All pivoting axis have radial bearings.
- Powder coat finish.
- Accessory storage.
- 42″ L x 58″ W x 84″ H
- 700 lbs
- Adjustable positions on all machines to accommodate all users to ensure correct bio-mechanical function. Adjustments are made with Heavy Duty spring loaded colored pull-pin knobs.
- Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack.
- Cable system with 1/4″ thick 4800 lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating to 3/16″ thick.
- Manual tension adjusters on every machine for the cable adjustments.
- Weight stack plates are solid steel machined precisely to with in an oz of weight.
- Weight stack is accessible from a seated position.
- Weight stacks are enclosed in full length shrouds.
- Weight system allows user to increase by 5 lb increments.
- Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked.
- Each machine is made with a lower starting weight stack and has counter-balanced arms when needed.
- Heavy-duty 40 oz. commercial grade marine Naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by thick plywood backing for stable support.
- Exceeds all ASTM requirements.
- Guide rods are 1″ CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi.
- Frames are constructed of High Stress 3/16″ ASTM A-500 grade B structural steel tubing (11 gauge) 2″x4″, 2″x3″ tubing. 2″x3″ tubing on all uprights, 2″x2″x1/8″ ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches.
- All welds are ground down and stress tested.
- Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting machine system that purifies steel. The steel is then sent through a preheat stage before the final magnetic paint powder is applied and baked for a long lasting hardened finish.
- Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 +/- 0,10 and above in high-compression areas) and HR-150 (density pcf of 4.60 +/- 0.30).
- Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercise complete range of motion. All cams are 1/4″ thick solid steel. The cams are different for each machine to provide correct movement for the exercise.
- Shrouded pulley housing is 6″x1/4″ thick solid steel.
- Pulley wheels are 4″ and 6″ solid fiberglass reinforced body with a 1/2″ cable groove. Oil dipped double sealed racer ball bearings with a 1/2″ axis shaft hole. Sealed for moisture and dust proof.
Shipping and Installation are additional and you will be contacted by one of our Business Development Representatives to arrange them.